Remote Control Function
Install Viewer
68
Remote Control Function
The CL7200 can be controlled remotely from a PC. Using the remote control
function you can operate, program or troubleshoot the scale. To use the remote
control function a third party viewer is required. For example, you could use a
viewer such as the TightVNC viewer.(download from www.tightvnc.com). You could
also use another viewer if desired. This document will explain how to connect
using the TightVNC viewer.
Install VNC Viewer (PC)
1. Open the setup file.
2. Click Next.
3. Check the box Agree to the License Agreement and press Next.
To Next Page
Loading...
