Scale Data Backup to USB
Menu 1877
7
Scale Data Backup to USB
(Menu 1877)
Almost all of the scale’s programmed information can be saved or backed up to a
USB flash drive using Menu 1877.
1. Insert the USB flash drive in one of the two USB slots on the
communications panel located in the scale base.
2. Access Menu 1877.
3. Type in a Folder Name for the backup file.
Notes: 1.) The Folder Name will default to a date_time of the backup if no
description is entered. [ Ex.) 09-27-17_0836 ]
2.) The first time a backup is performed on the USB flash drive, the
scale will create a folder structure to store the backup data.[ Ex.)
CL7200\Data\Folder Name ]
3.) Multiple backups can be stored on the same USB flash drive.
4.) There is no warning if an attempt is made to create a backup with
a folder name that already exists, the existing backup data will just
be overwritten.
To Next Page
Loading...
