Restoring Scale Date from USB
Menu 1878
9
Restoring Scale Data from USB
(Menu 1878)
Data that has been backed up to a USB flash drive using the scale can be restored
using Menu 1878.
Caution: When restoring a backup folder that was made on a
different scale please remember that the backup may
contain information such as the Network Settings, Scale
Number, Sales Reports, etc. After the restore is completed
the programmed data should be reviewed in case changes
need to be made to prevent communication issues.
1. Insert the USB flash drive in one of the two USB slots on the
communications panel located in the scale base
2. Access Menu 1878.
3. Select the data folder to be restored by pressing the folder name in the
list.
Note: To delete a backup folder from the list press the Select key then
press the backup folder name and then press Delete. When
prompted press the Confirm button to delete the backup folder.
To Next Page
Loading...
