Firmware Update Procedure
USB Update
1
Firmware Update Procedure
The firmware can be updated using a USB Flash Drive or a PC. Both methods are
explained below.
USB Update
Note: USB flash drive format is FAT32.
New firmware files will be located in a folder named “patch”.
1. Copy the patch folder to the USB Flash Drive.
2. Power off Scale.
3. Plug the USB Flash Drive into the scale.
4. Press and hold the power switch to turn the scale on.
5. The update screen will be displayed.
6. Make sure there is an “X” beside the firmware version that is to be loaded.
If not, simply touch the box with the firmware version in it.
To Next Page
Loading...
