PLU Image Display
Adding PLU Images to a New PLU
43
Adding Images to a PLU
After images have been loaded into the scale they can be attached to PLU’s
using Menu 1120 New/Edit. Images can be added while programming new
PLU’s or they may be added to existing PLU’s.
Notes: 1.) When a PLU has an image attached that image will be displayed in the
customer display when the PLU is recalled. Also if a PLU with an image
attached is programmed on a Speed Key the image will display on the
key.
2.) If you only want images to be displayed in the customer display and do
not want images to be displayed on the operator’s keyboard you can
change Parameter 752.
New PLU
1. Access Menu 1120 New/Edit PLU
2. Enter the Department Number and press the Enter key.
3. Enter the PLU Number and press the Enter key.
To Next Page
Loading...
