105
k. Saving PLU (Menu code 15B0)
l. Print Tare value
Tare value is printed on the receipt
0: No tare value printed
1: Print the tare value all the time
2: Print the tare value if the tare value is existed
m. After transaction Display delay
Adjust the duration which the account
has appeared on the display after
the receipt printed
If the user set the time as ‘0’,
The instrument enter the sale mode after
press the key randomly
Set the number to the seconds is possible.
① (Using
key and go to option setting
mode from main menu. And then press )
to get into
PLU saving mode.
② User may select YES or NO by pressing "1" or
"0" respectively. You can simply change the
Setting by pressing “1” or “0”.
To Next Page
Loading...
