131
Chapter 24. LABEL (Menu code 1H00)
This chapter explains how to set Label Print.(CT100 PLUS)
① Pre
ss
key to enter main menu, and
enter PASSWORD. And then press
go to LABEL setting mode from main
menu.
a. LABEL SIZE
① Press
to get into LABEL Size setting
mode.
② Enter values for “Height”,
“
Gap Length”. If you press “Tare”Key,
Height and Gap Length of current label
Is measured.
b. Gap Sensor Calibration
① Press
to get into LABEL Size setting mode.
To Next Page
Loading...
