CAS CT100 Series - Chapter 12 SET 1 (Discount, Barcode & HW Setting)

82
Chapter 12. SET 1 (Discount, Barcode formatting & HW setting)
This chapter explains how to set BAUD 1 rate, BAUD 2 rate, discount rate, barcode format
for a single or total, and pulse length for operation cash drawer. In addition to these, it also
describes how to printing darkness, input currency symbol or name, scale number, font type
selection, and receipt number
Table 7 : SET 1
SET 1 Minimum Maximum Remark
BAUD 1 Rate (bps; bit per sec.) /
BAUD 2 Rate
9600, 19200, 38400,
57600, 115200
User should turn off
and on the scale after
setting new "BaudRate".
Scale number (#) 1 99
Receipt number 1 10
Discount Rate (%) 0 99
Barcode Format
Cash Drawer-Opening Pulse (ms.) 1 99
Printing Darkness 1 5 Default : 3
Currency Symbol or Name
(characters)
0 3 IRAN Version Max = 4
Font 1 2
Speed PLU key Set
Quick Plu set 0 2
a. BAUD 1 rate (bps)(Menu code 1310)
BAUD rate is the data-downloading or uploading speed between the scale and PC.
User may set appropriate one of 5 speed options depending on his/her usage environment.
This rate must match the baud rate of the com port(com1, com2, etc) in the PC.
① Press
to enter main menu, and enter
PASSWORD, and to go to SET 1 mode.