93
Chapter 13. SET 2 (Date, Time, Password,
erase PLU data & Default setting)
This chapter explains how to set date and time, erase all of PLU data. In addition
to these functions it also shows how to do one-touch default setting.
a. Date & time (Menu code 1410&1420)
① Press
to enter main menu, and enter
PASSWORD. Then press ,
go
to SET 2 mode from main menu.
② Press to go to date setting mode.
③ Press any numerical keys you wish to input.
For example, let's input "24/06/2004" as date,
and press
to save date.
To Next Page
Loading...
