Cascade TEK TFO-1 - Setting the Constant Temperature Set Point

To Next Page

To Previous Page

28 | Page

OPERATION

SETTING THE CONSTANT TEMPERATURE SET POINT

HEATING PROFILES

Please see the Programming Guide –EZ-Zone Heating Profiles document for instructions on how to

program automated heating recipe profiles. The guide comes included with the oven and provides

illustrated explanations for all major heating profile functions and programming steps.

Adjust the constant temperature set point on the home page.

Adjust

• Do not exceed the high limit

set point.

Note: Holding down an arrow

button will cause the

temperature to advance in

increments of ten (10).

2. Release the Arrow buttons after adjusting the Set Point

• There may be a brief pause as the oven controller

calculates the optimum power usage to achieve the

set point starting from the current oven chamber

temperature.

• A small illuminated 2 near the bottom of the display

indicates the temperature controller is calling for

heat.

Oven Heating

Other manuals for Cascade TEK TFO-1