34 | Page
MAINTENANCE
GASKETS AND CHAMBER INTEGRITY
Periodically, inspect the door latch, trim, catch, and the gasket for signs of deterioration. Failure to
maintain the integrity of the door system shortens the life span of the oven.
These ovens use snap-in fiberglass chamber gaskets. The only tool required for swapping out these
gaskets is a cutting implement for tailoring the length of the new gasket. Use proper PPE for handling
exposed fiberglass when making the cuts.
ELECTRICAL COMPONENTS
Electrical components do not require maintenance. If the oven fails to operate as specified, please
contact your oven distributor or Customer Support for assistance.
To Next Page
Loading...
