7 | Page
RECEIVING YOUR UNIT
INSPECT THE SHIPMENT
• When a unit leaves the factory, safe delivery becomes the responsibility of the carrier.
• Damage sustained during transit is not covered by the manufacturing defect warranty.
• Save the shipping carton until you are certain that the unit and its accessories function
properly.
When you receive your unit, inspect it for concealed loss or damage to its interior and exterior. If you
find any damage to the unit, follow the carrier’s procedure for claiming damage or loss.
1. Carefully inspect the shipping carton for damage.
2. Report any damage to the carrier service that delivered the unit.
3. If the carton is not damaged, open the carton and remove the contents.
4. Inspect the unit for signs of damage. See the orientation depiction on the next page
as a reference.
5. The unit should come with an Installation and Operation Manual and a Programming
Guide.
6. Verify that the correct number of accessory items has been included. Included
accessory items.
7. Carefully check all packaging for accessory items before discarding.
Model Shelves Shelf Clips Leveling Feet Power Cord
TFO-3 2 8 4 1
Shelves
TFO-1 TFO-3 TFO-5
A high-temperature access port stopper ships installed in the port located on the back of the oven.
To Next Page
Loading...
