CHAPTER 7 - ELECTRICAL
7-3
6-34551NA Issued 8-04 Bur
FUSES
IMPORTANT: Before changing fuses or relays, turn the starter key switch to the Shut down position.
IMPORTANT: Never replace a fuse with a fuse of a different amperage.
The fuse box is located in the operator’s compartment at the back on the left-hand side.
CT02D244
Figure 1
To access the fuses, remove the cover of the box.
A notice on the cover gives the function and amperage of each fuse.
NOTE: To remove and install a fuse, use the plastic pliers located inside the box.
NOTE: Two spare fuses (10 amp and 20 amp) are to be found on the inside of the cover.
CT02D245
Figure 2
To Next Page
Loading...
