Case CX80 - Steps and Access Handles

CHAPTER 3 - INSTRUMENTS AND CONTROLS
3-4
Issued 8-04 Bur 6-34551NA
STEPS AND ACCESS HANDLES
CT02C051
Figure 4
CX75SR, CX80
CT02C033
Figure 5
CX135SR
When getting down from or getting onto the machine,
use the steps, the tracks and the access handles.
CT02C034
Figure 6
WARNING: Always maintain three point
support while getting on and off the machine
and entering or exiting the operator’s cab. A
three point support system has been
provided that enables a person to use
simultaneously two hands and one foot or two
feet and one hand while ascending,
descending or moving about the machine.
WARNING: To get in or out of the cab, it is
imperative that the upperstructure frame is in
line with the undercarriage.
WARNING: Clean the steps and access
handles and remove all traces of grease, oil,
mud, and (in winter) ice.
WARNING: Never jump down from the
machine. When leaving the machine or
upperstructure, always face the machine and
use the steps and access handles.