Case CX80 - Offset Boom;Arm Lubrication; Machine Lubrication

CHAPTER 5 - LUBRICATION, FILTERS, AND FLUIDS
5-15
6-34551NA Issued 8-04 Bur
CT02C281
Figure 14
OFFSET BOOM /ARM LUBRICATION
Use the following grease:
EP NLGI grade 2 (for temperate and hot climates)
-20°C to +60°C
EP NLGI grade 0 (for cold climates) -40°C to +20°C
EVERY 50 HOURS - CX75SR, CX80
Number of points . . . . . . . . . . . . . . . . . . . . . . . . . . (9)
CT02C283
Figure 15
EVERY 50 HOURS - CX135SR
Number of points . . . . . . . . . . . . . . . . . . . . . . . . . . (9)
CT02C284
Figure 16
CT02D346
MACHINE LUBRICATION
Use the following grease:
EP NLGI grade 2 (for temperate and hot climates)
-20°C to +60°C
EP NLGI grade 0 (for cold climates) -40°C to +20°C
The numbers within brackets mentioned on the right
of the description indicate the number of lubrication
points.
EVERY 500 HOURS - CX75SR, CX80
Turntable bearing . . . . . . . . . . . . . . . . . . . . . . . . . (2)
CT02C245
Figure 17
EVERY 500 HOURS - CX135SR
Turntable bearing . . . . . . . . . . . . . . . . . . . . . . . . . (2)
CT02C246
Figure 18
EVERY 5000 HOURS - CX135SR
Swing reduction gear . . . . . . . . . . . . . . . . . . . . . . (1)
See Greasing the swing reduction gear.
10
8
11
9