Case CX80 - Windshield; Opening; Closing

CHAPTER 3 - INSTRUMENTS AND CONTROLS
3-23
6-34551NA Issued 8-04 Bur
WINDSHIELD
OPENING
1. Fold back the sunshield, if equipped (1) against
the windshield and pull the lever (2).
CT02C071
Figure 57
2. Hold the upper (3) and lower (4) handles and
carefully raise the windshield. Push to the rear
until it engages.
CT02C086
Figure 58
CT02C087
Figure 59
3. Engage the right-hand latch (5) in the cab
upright.
CT02C088
Figure 60
CLOSING
1. Unlock the right-hand latch (5) of the cab upright
CT02C089
Figure 61
2. Hold the lower (4) and upper (3) handles and
carefully lower the windshield. Make sure the
window is completely down.
CT02C090
Figure 62
WARNING: Make sure you follow the
instructions below properly. If the windshield
is not handled correctly it could slip and injure
your fingers or hand.
1
2
3
4
5
5
4