CHAPTER 1 - GENERAL INFORMATION
1-1
6-34551NA Issued 8-04 Bur
Chapter 1
GENERAL INFORMATION
TO THE OWNER
CT02C001FX
Figure 1
HYDRAULIC CRAWLER EXCAVATORS SERIES CX75SR, CX80 AND CX135SR
Your machine has been designed and built to the highest standards of quality. It conforms to all current safety
regulations. See Official documents. However, the risk of accidents can never be completely excluded. That is why
it is essential to observe elementary safety rules and precautions.
Read this manual carefully, paying particular attention to the instructions concerning safety, operation and
maintenance so as to avoid the risk of injury while operating or servicing the machine.
The standard attachments and tools of this machine are designed to carry out all kinds of earth moving and
rehandling operations. If you want to use this machine to handle a load (pipes, culverts, framework, etc.), make
sure that it is designed to carry out this kind of work. For this type of application, the machine must be equipped
with safety valves, an overload indicator, a load handling chart corresponding to the type of machine and its
attachment and a load fixing point. All legal requirements must also be strictly observed.
Do not use this machine for any application or purpose other than those described in this manual. If the machine is
to be used for work involving the use of special attachments, accessories or equipment, consult your Dealer in
order to make sure that any adaptations or modifications made are in keeping with the machine's technical
specifications and with prevailing safety requirements.
Any modification or adaptation which is not approved by the manufacturer may invalidate the machine's initial
conformity with safety requirements.
To Next Page
Loading...
