Casella CEL-35X dBadge Users Handbook – Page 28
CEL-6354 Hard Hat
Mounting Kit
6.3 CEL-6353 Harness Mounting Kit
The CEL-6353 is used for attaching the CEL-35X to the D8147
harness or an existing harness that the employee may wear. The
CEL-6353 harness kit and the D8147 are pictured in Figure 25.
Figure 25
6.4 CEL-6354 Hard Hat Mounting Kit
The CEL-6354 hard hat mounting kit can be used to fit the CEL-
35X dBadge to most hard hats. It consists of a loop with four
hooks which loop over the rim of the hard hat. The CEL-6351 pin
clips are used to connect the hard hart mounting kit to the dBadge.
Figure 26
CEL-6353 Harness
Mounting Kit
CEL-6353 Harness
Mounting Kit, Fitted to
D8147 Harness
CEL-6354 Fitted to a
Hard Hat
To Next Page
Loading...
