Casella CEL-35X dBadge Users Handbook – Page 5
1 INTRODUCTION
The CEL-35X family consists of the CEL-350 dBadge and the
CEL-352 dBadge ‘Plus’. The CEL-35X dBadge is a unique solution
to problems associated with the measurement of personal noise
exposure. Using the latest digital technology ensures reliable and
repeatable measurements
. The CEL-35X dBadge has no cable
like a traditional dosimeter, so is far easier to fit to an employee
and is less likely to interfere with the individuals work. Casella
CEL provides various mounting options for the dBadge.
The CEL-35X dBadge is very simple operate with just 2 keys, and
can be locked to prevent tampering. After a measurement has
been completed the noise badge can be downloaded via it’s infra-
red port to the dB35 PC software. This will allow comprehensive
analysis of an employee’s exposure.
This manual describes the operation of the CEL-35X dBadge and
the associated mounting options, as well as charging the dBadge.
Use of the CEL-35X/IS Intrinsically Safe (I.S.) dBadge is
described, including special requirements for use under ATEX
certification.
The CEL-352 dBadge ‘Plus’ measures additional values which
allow for the selection of hearing protection via the Single Number
Rating (SNR) or High, Medium, Low (HML) methods.