Casio Casiotone CT-S1 - Playing with Reverb

Controlling the Sound of a Performance
EN-30
You can use the procedure below to add reverb to the notes you play.
1. While holding down FUNCTION, press the D2 keyboard key.
• Do not release FUNCTION until step 2, below.
A notification tone will sound to indicate the reverb type selection mode.
2. Use keyboard keys C2 through C4 to select a reverb type.
This sounds a notification tone and sets the selected reverb type.
3. Release FUNCTION to complete the setting operation.
Playing with Reverb
Keyboard
Note Name
Reverb Type
C2 Depends on the tone.
C{2 to F2 Room 1 to 5
F{2 to G2 Large Room 1 or 2
A}2 to C{3 Hall 1 to 6
D3 to E3 Stadium 1 to 3
F3 to F{3 Plate 1 or 2
G3 Delay
A}3 Pan delay
A3 to B}3 Long delay 1 or 2
B3 Church
C4 Cathedral
C2 C3 C4 C5 C6
C7
D2