Controlling the Sound of a Performance
EN-37
You can use the procedure below to adjust the overall pitch by changing the frequency of A4. (0.1 Hz
units)
1.
While holding down FUNCTION, press B}3 keyboard key.
• Do not release FUNCTION until step 2, below.
2.
Use keyboard keys C4 through E5 to set the note pitch.
• You can specify a frequency in the range of 415.5 Hz to 440 Hz to 465.9 Hz.
• Each press of the – or + keyboard key decreases or increases the frequency of the A4 note in
0.1 Hz steps. Long-pressing either of these keyboard keys scrolls the setting value.
• A reference tone sounds whenever the setting values becomes an integer (whole number), such
as 440, 441, etc.
• You can use keyboard keys 0 through 9 to input a three-digit integer value and then press
FUNCTION. In this case, the digit to the right of the decimal point will automatically become 0.
• To return the setting to its initial default, press the – and + keyboard keys at the same time.
3.
Release FUNCTION to complete the setting operation.
Fine Tuning (Tuning)
0123456789
＋−
D4
C{4
C4 E4 F4 G4 A4 B4 C5 D5 E5
E}4
To Next Page
Loading...
Need help?
General
