Casio Casiotone CT-S1 User Manual

Controlling the Sound of a Performance
EN-32
You can use the procedure below to layer two tones and output the resulting sound. The part that is
played using a single tone is the main part, while the second part that is layered over the main part is
the layer part.
1. While holding down FUNCTION, press the C3 keyboard key.
This enables layering.
• Each press of the keyboard key sounds a tone that lets you know what setting was selected.
High tone: On
Low tone: Off
2. To select the layer part, hold down FUNCTION as you press the E3 keyboard key.
• Do not release FUNCTION until step 3, below.
3. Press a keyboard key within the range of C2 through C7 to select a tone.
This layers the tone you selected.
• Each of the keyboard keys has a tone assigned to it. For tone information, see the “Tone List”
(page EN-76).
4. Release FUNCTION to complete the setting operation.
5. To cancel layering, hold down FUNCTION as you press the C3 keyboard key.
Layering Two Tones
Main part
Layer part
C2 C3 C4 C5 C6
C7
C3
C3
C3
C3
C3
C2 C3 C4 C5 C6
C7
E3

Casio Casiotone CT-S1 Specifications

General

Keyboard	61 keys
Polyphony	64 notes
Tones	61 tones
Effects	Reverb, Chorus
Amplifiers	2.5W + 2.5W
Metronome	Yes
Power Consumption	5.5 W
Power Supply	AC adapter or AA batteries
Touch Response	Yes (3 sensitivity levels, Off)
Other Functions	Transpose
MIDI	Yes
Connectivity	Headphones/Output, Audio In, USB to Host