Configuring Settings
EN-55
Item Setting Options Description Remarks
ct
Battery type Alkaline, Nickel
metal hydride
(Initial Default:
Alkaline)
Specifies the type of
batteries being used.
(See page EN-7.)
• Each press of the keyboard
key sounds a tone that lets
you know what setting was
selected.
One tone: Alkaline
Two tones: Nickel metal
hydride
dk
Auto Power Off Off, On
(Initial Default:
On)
Enables/disables Auto
Power Off. (See page
EN-14.)
• Each press of the keyboard
key sounds a tone that lets
you know what setting was
selected.
High tone: On
Low tone: Off
dl
Local Control Off, On
(Initial Default:
On)
Enables/disables
transmission of
performance information
generated by the Digital
Keyboard to the Digital
Keyboard’s internal
sound source.
• Each press of the keyboard
key sounds a tone that lets
you know what setting was
selected.
High tone: On
Low tone: Off
dm
MIDI OUT
Channel
(main part)
Off, 1 to 16
(Initial Default: 1)
Changes the channel of
MIDI messages that are
MIDI output by main part
play.
• To return the setting to its
initial default, press – and + at
the same time.
• A reference tone sounds
whenever the setting values
becomes off.
dn
MIDI OUT
Channel
(layer part)
Off, 1 to 16
(Initial Default: 2)
Changes the channel of
MIDI messages that are
MIDI output by layer part
play.
• To return the setting to its
initial default, press – and + at
the same time.
• A reference tone sounds
whenever the setting values
becomes off.
ct
Battery type
dk
Auto Power Off
dl
Local Control
dm
MIDI OUT Channel (main part)
dn
MIDI OUT Channel (layer part)
do
Program Change Send
To Next Page
Loading...
Need help?
General
