Sampling Sounds and Playing Them on the Digital Piano
E-22
Normally when the Digital Piano is in sampling standby, it will 
start sampling automatically whenever it detects sound input. 
You can use the following procedure to enable manual 
sampling start, which will cause sampling to wait until you 
press a button to start it. You can use this to insert silence 
before the sampled sound.
1.
Press 
7
 and then use the 
cl
 (10-key) [4] (u) 
and [6] (i) keys to display “SAMPLING” (page 
E-6).
2.
Press the 
cl
 (10-key) [7] (ENTER) key.
3.
Press the 
cl
 (10-key) [–] key to turn off 
automatic sampling start.
This enables manual sampling start, which operates as 
described below.
• Melody sampling (page E-17):
Sampling starts when you release 
6
, which you press 
in step 3 of the sampling procedure.
• Drum sampling (page E-19):
Sampling starts when you release the digital piano key 
you press in step 4 of the sampling procedure.
• When manual sampling start is enabled, sampling 
starts when you release 
6
 or the keyboard key, not 
when you press it. Sampling does not start if you hold 
down the button or key.
Normally the Digital Piano will stop sampling automatically 
whenever it detects there is no sound input. You can use the 
following procedure to enable manual sampling stop, which 
will cause sampling to continue until you press a button to 
stop it. You can use this to insert silence after the sampled 
sound.
1.
Press 
7
 and then use the 
cl
 (10-key) [4] (u) 
and [6] (i) keys to display “SAMPLING” (page 
E-6).
2.
Press the 
cl
 (10-key) [7] (ENTER) key.
3.
Press the 
cl
 (10-key) [6] (i) key.
4.
Press the 
cl
 (10-key) [–] key to turn off 
automatic sampling stop.
Even when there is no sound input from an external 
device or microphone, sampling will continue until you 
press and release 
6
 or a keyboard key.
• When manual sampling stop is enabled, sampling 
stops when you release 
6
 or the keyboard key, not 
when you press it. Sampling does not stop if you hold 
down the button or key.
Other Sampling Functions
Changing to a Manual Sampling Start
S A M P L  I  N G
Flashes
A u t o S t r t
Changing to Manual Sampling Stop
A u t o S t o 
p
CDP200R_e.book  22 ページ  2008年4月21日 月曜日 午後3時4分