Casio CDP-200R - Connecting External Devices; Connecting a Computer

Using a Memory Card
E-60
5. Press the
cl
(10-key) [7] (ENTER) key.
• Pressing [9] (EXIT) will return to the screen that was
displayed before you pressed [7] (ENTER).
6. Use the
cl
(10-key) [–] and [+] keys to select the
number of the data (file) you want to load.
7. Press the
cl
(10-key) [7] (ENTER) key.
This will load the data into Digital Piano memory.
• If there is already data stored in the user area where
you are trying to load data, an overwrite confirmation
message will appear. Press the
cl
(10-key) [+] (YES)
key to overwrite, or [–] (NO) or [9] (EXIT) key to cancel.
Use the following procedure to delete data saved on an SD
memory card.
1. On the Digital Piano, select the data you want to
delete as described below.
2. Insert a SD memory card into the piano’s card
slot.
3. Hold down
ck
until the button lights.
• To cancel data delete, press
ck
again.
4. Use the
cl
(10-key) [4] (u) and [6] (i) keys to
display one of the settings shown below.
• You also could use [–] and [+].
* * * * * * * *
Flashes
C o m
p
l e t e
R e
p
l a c e ?
Deleting Data from an SD Memory
Card
To delete this
type of data
Do this
Sampled sound Select the tone number of the sampled
sound.
User rhythm Select the rhythm number of the user
rhythm.
User song Select the song number of the user
song.
Recorded song Select the song and put the Digital
Piano in playback standby.
User scale
memory
Press
bs
and then
5
.
Registration data
Select one of the Digital Piano’s default
built in tones, songs.
All data
To delete this type
of data
Display this screen
Sampled sound “dEL” “SmplTone”
User rhythm “dEL” “UserRhy.”
User song “dEL” “UserSong”
Recorded song “dEL” “Rec.Song”
User scale memory “dEL” “ScaleMem”
Registration data “dEL” “Regist.”
All data “dEL” “All Data”
CDP200R_e.book 60 ページ ２００８年４月２１日 月曜日 午後３時４分