Casio ClassPad 330 - Program

CASIO ClassPad 330 and ClassPad Manager Software Version 3.04
Copyright © 2009 CASIO COMPUTER CO., LTD. All Rights Reserved.
24
Using the Program Application
Naming a Program
a. Tap m and then p
b. Tap the O toolbar button
c. Enter a name for your program
d. Tap OK
Entering Code
a. Open the Ctrl menu
b. Select For
:
and then For
c. Continue to use the Ctrl menu to
input remaining code for the loop
d. You will find Print in the I/O
menu under Output
Running your Program
a. Tap the { toolbar button
b. Tap the
) toolbar button
c. Tap the p toolbar button
d. Tap OK
e. Tap in the upper window and
select P to edit your program