102
Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * Quick Shutter
When Quick Shutter is turned on, you can press the shutter button all the way without
waiting for Auto Focus. This will record the image using a high speed focus operation
that is much faster than Auto Focus.
NOTE
• At relatively high zoom factors, Quick Shutter will stop working and the camera will
switch over to standard Auto Focus.
• The Quick Shutter setting is enabled for the second and subsequent images of a
Normal Speed CS group.
Procedure
[r] (REC) * [MENU] * REC Tab * Grid
The on-screen grid can be displayed on the REC mode
monitor screen for easy vertical and horizontal alignment
when composing images.
Shooting with Quick Shutter (Quick Shutter)
On
Turns on Quick Shutter
• Some images may be out of focus when Quick Shutter is used.
Off
Turns off Quick Shutter so focus is performed using normal Auto Focus
before the image is recorded.
• If you fully press the shutter button while Quick Shutter is turned off,
images will continue to be shot without focusing.
• Whenever possible, take a little extra time to half-press the shutter
button in order to ensure proper focus.
Displaying the On-screen Grid (Grid)
To Next Page
Loading...
Need help?
General
