166
Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Language
. Specify the display language you want.
1
Select the tab on the right.
2
Select “Language”.
3
Select the language you want.
• Camera models sold in certain geographic areas
may not support display language selection.
Procedure
[MENU] * Set Up Tab * Sleep
This feature turns off the monitor screen whenever no camera operation is performed
for a preset amount of time. Press any button to turn the monitor screen back on.
Trigger Time Settings: 30 sec, 1 min, 2 min, Off (Sleep is disabled while “Off” is
selected.)
• Sleep is disabled under any of the following conditions.
– In the PLAY mode
– While the camera is connected to a computer or other device
– During a slideshow
– During movie recording and playback
– During Move Out CS or Move In CS auto record standby
– When both sleep and Auto Power Off are turned on, Auto Power Off takes
priority.
Specifying the Display Language (Language)
Configuring Sleep State Settings (Sleep)
1
23
To Next Page
Loading...
Need help?
General
