96
Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * AF Area
You can use the following procedure to change the Auto Focus metering area for
shooting snapshots.
• When recording movies, the AF metering area is always “
U
Spot”.
Specifying the Auto Focus Area (AF Area)
Spot
This mode takes readings of a small area in the center of the image.
This setting works well with focus lock (page 93).
Multi
When you half-press the shutter button while this setting selected, the
camera will select the optimum Auto Focus area from among nine
possible areas. The focus frame of the area where the camera focuses
will be displayed in green.
Free
You can move the focus frame by using [8], [2], [4], and [6] to move
the focus point and then pressing [SET]. To change the focus point
position, select “— Free” again and then use [8], [2], [4] and [6] to
select the position you want.
Tracking
When you half-press the shutter button while this setting is selected, the
focus frame will follow the movement of the subject.
To Next Page
Loading...
Need help?
General
