56
Snapshot Tutorial
11.
Use [4] and [6] to select the maximum number of shots for each
continuous shutter operation and then press [SET].
12.
Press the shutter button the rest of the way down.
Images continue to be shot as long as you keep the shutter button depressed.
13.
Image recording will stop when you release the shutter button or after
the maximum number of shots is reached.
14.
Save the CS images (page 56).
NOTE
• After shooting a group of images with F CS, it may take a few seconds before the
camera is ready to shoot again.
Use the procedure below to specify how images should be saved after a High Speed
CS operation.
1. In the REC mode, press [MENU].
2. Use [4] and [6] to select the “REC” tab.
3. Use [8] and [2] to select “Save CS Images”, and then press [6].
4. Use [8] and [2] to change the setting.
Specifying the Method for Saving Continuous Shutter Images
Normal (Batch)
All images that were shot are saved after the continuous shutter operation is
finished.
To Next Page
Loading...
Need help?
General
