105
OTHER RECORDING FUNCTIONS
1.
In a REC mode, press [MENU].
2.
Use [] and [] to select the “ Memory” tab.
3.
Use [] and [] to select the item you want to
change, and then press [].
4.
Use [] and [] to select the setting you
want, and then press [SET].
To do this:
Turn on mode memory so settings
are restored at power on
Turn off mode memory so settings
are initialized at power on
Select this setting:
On
Off
IMPORTANT!
• Note that BESTSHOT mode settings take priority
over mode memory settings. If you turn the camera
off while in the BESTSHOT mode, all settings except
for “REC Mode” and “Zoom Position” will be
configured according to the BESTSHOT sample
scene when you turn it back on again, regardless of
mode memory on/off settings.
• If you turn the camera off while in the Movie mode,
the flash will be turned off “ ” when you turn the
camera back on again, regardless of the mode
memory on/off setting for the flash.
To Next Page
Loading...
Need help?
General
