OTHER SETTINGS
144
Formatting Built-in Memory
Formatting built-in memory deletes any data stored in it.
IMPORTANT!
• Note that data deleted by a format operation cannot
be recovered. Check to make sure you do not need
any of the data in memory before you format it.
• Formatting built-in memory deletes the following.
— Protected images
— FAVORITE folder images
— BESTSHOT mode user setups
— Startup screen image
— Power down image
1.
Check to make sure there is no memory card
loaded in the camera.
• If there is a memory card loaded in the camera,
remove it (page 147).
2.
Press [MENU].
3.
Select the “ Set Up” tab, select “ Format” , and
then press [].
4.
Use [] and [] to select “ Format” , and then
press [SET].
• To exit the format operation without formatting,
select “Cancel”.
To Next Page
Loading...
Need help?
General
