68
OTHER RECORDING FUNCTIONS
Using Auto Focus
As its name suggests, Auto Focus focuses the image
automatically. The automatic focus operation starts when
you press the shutter button down half way. The following
is the Auto Focus range.
Range: Approximately 40cm to ∞ (1.3´ to ∞)
1.
Press [] ( ) to cycle through the focus
mode settings until there is no focus mode
indicator on the display.
2.
Compose the image so the main subject is
within the focus frame, and then press the
shutter button half way.
• You can tell whether the image is focused by
observing the focus frame and the operation lamp.
When you see this:
Green focus frame
Green operation lamp
Red focus frame
Flashing green operation lamp
It means this:
The image is focused.
The image is not
focused.
3.
Press the shutter button the rest of the way to
record the image.
NOTE
• When proper focusing is not possible because the
subject is closer than the Auto Focus range, the
camera automatically switches to the Macro mode
range (page 70).
■ Auto Pan Focus
When you press the shutter button all the way down in the
Auto Focus mode without pausing, the camera immediately
records the image using Pan Focus (page 71) without
waiting for Auto Focus to be performed. This helps to avoid
missing a special moment while you wait for the camera to
Auto Focus.
1.
In a REC mode, press [MENU].
1200
1600
NORMAL
10
04/
12
/24
12
:
58
IN
1 / 1000
F4.0
Focus frame
Operation lamp
To Next Page
Loading...
Need help?
General
