USING A MEMORY CARD
150
To copy a specific file from a memory
card to built-in memory
1.
Perform steps 1 through 3 of the procedure
under “ To copy all the files in built-in memory
to a memory card” .
2.
Use [] and [] to select “ Card Built-in” ,
and then press [SET].
3.
Use [] and [] to select the file you want to
copy.
4.
Use [] and [] to select “ Copy” , and then
press [SET].
• This starts the copy operation and displays the
message “Busy.... Please wait...”.
• The file reappears on the monitor screen after the
copy operation is complete.
• Repeat steps 3 through 4 to copy other images, if
you want.
5.
Press [MENU] to exit the copy operation.
NOTE
• Files are copied to the folder in built-in memory
whose name has the largest number.
To Next Page
Loading...
Need help?
General
