USING A MEMORY CARD
149
4.
Use [] and [] to select “ Built-in Card” ,
and then press [SET].
• This starts the copy operation and displays the
message “Busy.... Please wait...”.
• After the copy operation is complete, the monitor
screen shows the last file in the folder.
Copying Files
Use the procedures below to copy files between built-in
memory and a memory card.
IMPORTANT!
• Only snapshot, movie files, audio snapshot, and
voice recording files recorded with this camera can
be copied. Other files cannot be copied.
• Files in the FAVORITE folder cannot be copied.
• Copying an audio snapshot copies both its image file
and the audio file.
To copy all the files in built-in memory to
a memory card
1.
Load the memory card into the camera.
2.
Turn on the camera. Next, enter the PLAY
mode and press [MENU].
3.
Select the “ PLAY” tab,
select “ Copy” , and
then press [].
To Next Page
Loading...
Need help?
General
