97
OTHER RECORDING FUNCTIONS
• An RGB histogram that shows the distribution of R (red) ,
G (green) , and B (blue) components is also displayed.
This histogram can be used to determine whether there is
too much or too little of each of the color components in
an image.
NOTE
• You can use key customization (page 103) to
configure the camera to perform exposure
compensation whenever you press [] or [] while in
a REC mode. If you do this, you can adjust exposure
compensation while viewing the on-screen histogram
(page 75).
• When the histogram is too far
to the left, it means that there
are too many dark pixels.
This type of histogram results
when the overall image is
dark. A histogram that is too
far to the left may result in
“black out” of the dark areas
of an image.
• When the histogram is too far
to the right, it means that
there are too many light
pixels.
This type of histogram results
when the overall image is
light. A histogram that is too
far to the right may result in
“white out” of the light areas of
an image.
• A centered histogram
indicates that there is good
distribution of light pixels and
dark pixels. This type of
histogram results when the
overall image is at optimal
lightness.
To Next Page
Loading...
Need help?
General
