PRINTING IMAGES
184
■ Connecting the Camera to Your Printer
1.
Check the battery level indicator to make sure
that the battery is fully charged, and then
press the power button to turn off the camera.
• If battery power is low, replace the battery.
• The camera does not draw power over the USB
cable.
2.
Use the USB cable that comes with the
camera to connect the camera to a printer.
• Take care when connecting the USB cable to the
camera or your printer. USB ports and cable plugs
are shaped for proper positioning.
USB
USB port
USB cable
USB/AV connector
Make sure that the side of the connector that is marked
with an arrow (
왖
) is facing in the same direction as the
front (lens side) of the camera.
To Next Page
Loading...
Need help?
General
