APPENDIX
244
■ Using the Camera with a Macintosh
Computer
1.
Connect the bundled AC adaptor to the [DC IN
5.3V] connector of the USB cradle, and then
plug it in to a household power outlet.
• If you are using battery power without the AC
adaptor, make sure that the battery is fully charged.
• Note that the shape of the AC adaptor depends on
the area where you purchased the USB cradle/AC
adaptor.
[DC IN 5.3V]
2.
Connect the USB cable that comes bundled
with the camera to the USB cradle and your
computer’s USB port.
USB port
Connector A
USB cable
[ ] (USB port)
Connector B
[DC IN 5.3V]
○○○○○○○○○○○○○○○○○○○○○○○○○○○
To Next Page
Loading...
