113
USING BEST SHOT
5. Press the shutter button again to record the
next snapshot.
• If you are shooting into a three-frame layout, press the
shutter button a third time to record the third image.
• Pressing [SET] during steps 4 or 5 of the above
procedure will toggle between the layout screen (the one
with the frames on it) and a screen that uses the entire
display area to compose the image you are shooting.
• To clear the currently recorded Layout images and restart
an ongoing Layout operation, press [MENU]. Next,
continue from step 4 above.
• You cannot save a multi-snapshot image unless there are
snapshots recorded in each of the available frames.
IMPORTANT!
• Only the final multi-snapshot image is saved in camera
memory. The individual snapshots are not saved.
• The size of the multi-snapshot image for this operation is
fixed automatically at 7M (3072 × 2304 pixels).
• While Layout Shot is being used, the setup of the camera is
changed automatically as shown below.
– ISO Sensitivity: Auto (fixed)
– AF Area: Spot (fixed)
• The following functions are disabled during Layout Shot.
– Digital Zoom
– Self-timer
– Continuous Shutter
– Face Recognition
To Next Page
Loading...
