122
ADVANCED SETTINGS
Quick Shutter
If you press the shutter button all the way without waiting for
Auto Focus while Quick Shutter is turned on, the camera will
record the image using a high-speed focus operation that is
much faster than normal Auto Focus. This helps to avoid
missing a special moment while you wait for the camera to
Auto Focus.
• Some images may be out of focus when Quick Shutter is
used.
1. In the REC mode, press [MENU].
2. On the “REC” tab, select “Quick Shutter” and
then press [X].
3. Use [S] and [T] to select the setting you
want and then press [SET].
4. Press the shutter button all the way down
without pausing.
Pressing the shutter button all the way without pausing at
the halfway type will record with Quick Shutter, without
performing the normal Auto Focus operation.
IMPORTANT!
• Quick Shutter will not work when you are using a very
high zoom factor. In this case, you should use Auto Focus
instead.
To do this: Select this setting:
Turn on Quick Shutter On
Turn off Quick Shutter Off
To Next Page
Loading...
Need help?
General
