Casio GzOne User Manual

145
SETTINGS & TOOLS
5. Enter the new four-digit code in the Enter New Code field.
If you selected Calls & Services in step 4, you would also need to
enter the current code before entering the new code.
6. Press the Directional Key  down to advance to the Re-enter
New Code field.
7. Enter the new four-digit code again as confirmation.
8. Press the Center Select Key [SET].
NOTES
The default Lock Code is the last 4 digits of your phone number.
There are two Lock Codes: Phone Only and Calls & Services.
•
•
Restrictions
Use the following procedure to configure Location Setting, Calls,
Messages, and Dial-Up Modem restrictions.
1. From idle mode, press the Center Select Key [MENU], select
Settings & Tools, then press the Center Select Key [OK]. Press
 Phone Settings,  Security.
2. Enter the four-digit Lock Code, then press the Center Select Key
[OK]. The default Lock Code is the last 4 digits of your mobile
telephone number.
3. Press  Restrictions.
4. Enter the four-digit Lock Code, then press the Center Select Key
[OK].
5. Select one of the following setting and then press the Center Select
Key [OK].
Location Setting: Unlock Setting/Lock Setting
Calls: Incoming Calls/Outgoing Calls
For Incoming Calls, set Allow All/Contacts Only/Block All.
For Outgoing Calls, set Allow All/Contacts Only/Block All.
I

Casio GzOne Specifications

General

Brand	Casio
Model	GzOne
Category	Cell Phone
Language	English