Casio IT-G500 Series - Input from the Software Input Panel (SIP); Operation Method

187
4.2 Input from the Software Input Panel (SIP)
This section explains how to input from the Software Input Panel (SIP).
[Note] Refer to “2.2 Key Control” about the keyboard key functions.
4.2.1 Operation Method
(1) Press the “Fn + 0” keys to display the Software Input Panel. The touch panel can be now be
used for key input.
(2) Touch the Keyboard icon in the bottom right of the screen to switch the display mode.
Input Panel
Numeric mode
[CAP] On