Casio IT-G500 Series - Laser Scanner (1 D) Settings; Laser Setting

129
3.5 Laser Scanner (1D) Settings
This function only applies to models equipped with a laser scanner (1D).
Refer to Chapter 2, “2.9 Laser Scanner (Barcode)” for details of this function.
3.5.1 Laser Setting
Select Start -> Settings -> System -> Scanner Setting.
Setting the scanner device, you can change from the following Tool.
[Read barcode]Tab [Driver Mode]Tab
Tab Explanation
Read barcode Specify the 1D code to read.
Multiple symbologies can be specified.
Driver Mode This tab is to set up “Enable” or “Disable” for 1D symbologies, and to
specify options.
- No.of read digite(Min)
- No.of read digits(Max)
- Output format
- Check-digit
- Check-digit output