Casio IT-G500 Series User Manual

63
- Reading the number of scanned digits
Figures outside brackets are the numbers of readable digits. Figures inside brackets are numbers of
settable digits for the library and Control Panel. However, caution is required because the numbers
of readable digits are guideline figures, and the actual readable range depends on the error
correction level, the state of symbol printing (resolution, print density, thickness, etc.) and the
surrounding environment. Numbers of readable digits are strongly influenced by the module’s focal
length. Long-distance types have long depth of field, so it is possible to fit large symbols within the
angle of view, and the number of readable digits is larger.
(2) 2D code (stacked code)
Code
Scan
No. of digits
Check
Character
Check
Character
output
Remarks
PDF417
1~2000
(0~2750)
Always
enabled
Always
disabled
MicroPDF
1~366
(0~2750)
Always
enabled
Always
disabled
Codablock F (*1)
1~200
(0~2048)
Always
enabled
Always
disabled
EAN8/13 Composite
8~338
(1~2435)
Always
enabled
Always
disabled
EAN8/EAN13
+ MicroPDF
RSS Composite (*3)
2~338
(1~2435)
Always
enabled
Always
disabled
RSS (1D)
+ MicroPDF
UCC/EAN128
Composite
6~2361
(1~2435)
Always
enabled
Always
disabled
EAN128
+ MicroPDF or
PDF417
RSS-14
(Stacked type) (*2)
(*3)
14
Always
enabled
Always
disabled
RSS Expanded
(Stacked type) (*3)
1~20
(1~80)
Always
enabled
Always
disabled
(*1) The Codablock F code has Code128 codes superimposed vertically. Therefore if Code128
code scanning is enabled, part of the Codablock F code may be scanned as Code128.
(*2) This includes the Standard Omnidirectional type.
(*3) The name of code RSS has been changed to “GS1 DataBar”.
[Addendum] The way of reading the scanned number of digits is the same as described for a 1D
code (barcode).

Casio IT-G500 Series Specifications

General

Brand	Casio
Model	IT-G500 Series
Category	Handhelds
Language	English