82
- Video file adjustment function
The video file adjustment functions are as follows:
The parameters which can be set for video capture are as follows.
Table of settable parameters for the video file adjustment function
Item Setting parameters Remarks
Image quality = Low
(compression ratio = High)
Image quality = Normal
(compression ratio =
Normal)
Default
Image quality = High
(compression ratio = Low)
Image quality
(compression ratio)
Image quality = Highest
(compression ratio =
Lowest)
Sound on Sound on/off
Sound off Default
- Exclusive control from other devices
Exclusive control is used so that the CMOS imager and the camera cannot be used at the same
time. This is necessary because both devices use the same hardware resources. If these devices
are used at the same time, the one that was used first is always prioritized. For example, if the user
attempts to use the camera preview function while the CMOS imager is open, the camera driver
returns an error.
Device Excluded operation
Camera - Preview display, still image capture, video capture
CMOS imager - CMOS imager open
To Next Page
Loading...
