86
functions successfully activated
IC card
Timeout elapses
*1 A timeout occurs when the wait time from the transmission of a command by the NFC module
until receipt of a response from the IC card exceeds the above-mentioned 60 milliseconds.
Below is an example of data communication between an NFC module and an IC card.
Description
The NFC module consumes very little power while it is on.
In addition, turning the module on takes time, so if you would like to start communicating with an IC
card straight away, please be sure to open the device prior to activating the application. When
initiating communication with an IC card, start by performing card polling. When terminating the
application, please be sure to close the device.
To Next Page
Loading...
Need help?
General