PAGE
2828
2828
28
SAVE ALL MESSAGES
MANUALLY
MESSAGE RETRIEVAL
WHEN MEMORY IS FULL
If the TA-150’s memory is full, you will hear
three short confirmation tones after your
greeting. To retrieve messages remotely when
the TA-150’s memory is full:
Select another option or hang up.
Press
2
on a telephone keypad within
seven seconds after the voice menu ends.
1
I will save
messages.
ABC
2
2
NOTE:
ν If you do not erase messages, the TA-150 will
automatically save them when you hang up.
REMOTE OPERATION (CONT.)
2
Follow the instructions on page 26 for
remote message retrieval.
3
To allow room for additional incoming
messages, it is advisable to erase all
messages by pressing
3
on the keypad
after you hear “
End of Messages
”.
DEF
3
1
Enter your
3-DIGIT REMOTE ACCESS
CODE
during the greeting or within ten
seconds of hearing the three beeps.
NOTE:
ν If you choose to erase messages by pressing
3
,
messages are permanently erased when the call is
terminated.
ν Message File messages will be saved and cannot be
erased accidentally in remote operation.
1
Press
3
on a telephone keypad after
hearing,
End of
Messages.
ERASE ALL MESSAGES
DEF
3
2
All messages will be erased.
I will erase
messages.
MNO
6
GHI
4
TUV
8
To Next Page
Loading...