Casio PhoneMate TA-150 - Program Your Remote Access Code

PAGE
2525
2525
25
You can use Remote Operation from most
touchtone or cellular phones to retrieve,
replay, erase and save messages.
REMOTE OPERATION
PROGRAM YOUR
REMOTE ACCESS CODE
The TA-150 is shipped with the code set to 1-2-
3. To change your 3-DIGIT REMOTE ACCESS
CODE:
1
Press CODE SET . (Under the lid.) The
current 3-digit code will appear in the
display and you will hear:
CODE SET
2
Press SKIP or REPEAT to select the
first digit of the access code.
GREETING 1
6 23
SKIP
4
Press CODE SET again. You will hear:
Set code
digit 2.
Once a number is selected, press
CODE SET to confirm the entry of the
first digit.
3
5
Press SKIP or REPEAT to select the
second digit of the access code.
Once a number is selected, press
CODE SET to confirm the entry of the
second digit.
6
GREETING 1
6 43
GREETING 1
6 48
8
Press SKIP or REPEAT to select the
third digit of the access code.
7
Press CODE SET again. You will hear:
9
Press CODE SET , once a number is
selected, to confirm the entry of the third
digit. Your newly programmed code will
be announced and appear in the LCD for
several seconds before resuming to
normal operation.
648
NOTE:
ν If you call from a rotary, pulse or any non-touch-tone
telephone, use CASIO PHONEMATE’s Touchtone Dialer.
The touchtone dialer is necessary to generate the tones
required by the TA-150 to remotely access your machine.
Use the accessory order form on page 35 to place an
order.
Set code
digit 1.
Set code
digit 3.