Casio PhoneMate TA-150 - Greeting Modes; Pre-Recorded Greeting; Deactivate Announce Only

PAGE
1414
1414
14
GREETING 1
AO
GREETING MODES
(cont.)
PRE-RECORDED
GREETING
If you are listening to your greetings and a
greeting has not been recorded for one or all of
the modes, the TA-150 will remind you that you
need to record a greeting by playing: “ Record a
new greeting. ” When the TA-150 answers a
call, the callers will hear, the pre-recorded
message: “ Please record a message after the
tone. ”
BYPASS GREETING
Frequent callers can skip your greeting when
they call to leave a message. Instruct them
to press # on their touchtone keypad any time
after the TA-150 answers their call.
ANNOUNCE ONLY
Set the TA-150 to play greetings only in any of
the six greeting modes and disable the unit from
recording any incoming messages.
1
Press ANNOUNCE ONLY (under the
lid). You will hear a confirmation tone and
“AO” will appear in the display to indicate
ANNOUNCE ONLY is activated.
NOTES:
ν The clock display will not appear when ANNOUNCE
ONLY is activated, but the TA-150 will maintain the
internal clock.
ν Memos and conversations can still be recorded at the
machine when ANNOUNCE ONLY is activated.
ν It is recommended that you notify callers in your greeting
that the unit has been programmed to play a greeting
only.
DEACTIVATE
ANNOUNCE ONLY
1
Press ANNOUNCE ONLY (under the
lid) and you will hear a confirmation tone.
“AO” will disappear from the display and
the clock will reappear.
OR
1
Press ON/OFF (under the lid) twice to
deactivate ANNOUNCE ONLY. “AO” will
disappear from the display and the clock
will reappear.
ANNOUNCE ONLY
ON/OFF
ANNOUNCE ONLY
MESSAGE FILE
CALL SCREEN
SLOW
FAST
+
12:30
PM
ALL DIG
I
MULTI
P
CODE SET CODE CHECK
CHECK SELECT TIME SET
ANNOUNCE ONLY ON/OFF
GREETING
GREETING 1 2
SCREEN OFF