REFERENCE
E-148
Insert memory card!
MEMORY FULL
Change quality/size
or delete unneeded
images
MEMORY FULL
Delete unneeded
images
LENS CAP!
There is no memory card loaded in the camera.
Load a memory card (page E-39).
There is not enough memory to record an image
with your current quality and size settings. Change
the image quality and size settings and try again, or
delete some images from the memory card (page E-
110).
• There is not enough memory for further recording.
Delete some images you don’t need from memory
card (page E-110).
• The DCIM folder or other file (page E-131) cannot
be created due to insufficient memory when
downloading data from a computer to the memory
card. Use your computer to delete unneeded im-
ages to free up memory card space for the images
you are downloading. You could also press the
MENU button and format the memory card in the
camera, but doing so deletes all image files cur-
rently stored on the memory card.
• This message appears and power turns off auto-
matically if you align the POWER/Function Switch
with REC and the lens cap is attached. Remove
the lens cap and then turn on power.
To Next Page
Loading...
